How to connect a wired energy manager.

Wired energy managers are included in all home product series charger. It measures the power your property is using and when installed ensures your charger doesn’t draw more power than is available.

If your installation is a long distance from your consumer unit, or using existing wiring which dosn't have additional wires, you may consider using our wireless energy manager

To install you will first need to connect the wires to the wago connectors within the charger. These may need extending using a twisted pair of wires back to the consumer unit. The CT will need clamping around the livewire.

Next you will need to configure within the Simpson andpartners app.

1.     Open the App

2.     Ensure you are close to the charger andconnected via Bluetooth

3.     Open the installers section of the app

4.     Enter your pin 880088

5.     Select your charger

6.     Scroll down to “smart home setup”

7.     Select “wired energy manager” and click Add

8.     Ensure the CT colour matches your supplied unit

9.     You should see a reading of your properties usage.

Setting up Home load balancing

1.     Open Home load balancing

2.     Enable dynamic fuse (if you want to downrate thecharge based on property usage)

3.     Set your home fuse rating to that of yourproperty

4.     Fail safe rating is the rating that will defaultto if connection to the CT is lost.

Close the installer app, setup is complete