Yes. All chargers (freestanding and wall mounted) are IP-rated, weatherproof and designed for outdoor use in rain, snow, or extreme temperatures.

Yes — connection via our charger is fully supported and will work as expected. Octopus can still start and stop charging, but it cannot automatically stop at your set battery limit because it doesn’t read the real-time charge level.

Single-phase power is the standard electricity supply for most UK homes — around 85% of domestic properties use it. It delivers electricity through one live wire and is protected by a single fuse (typically rated at 60, 80, or 100 amps). With single-phase, the maximum charging rate for an EV charger is usually 7.3kW, which is ideal for overnight charging and suits most households. Three-phase power, on the other hand, is more common in commercial buildings or larger homes. It uses three live wires, allowing electricity to flow more efficiently and at higher capacity. If your property has a three-phase supply, you can install a charger capable of delivering up to 22kW —useful for larger battery EVs or homes with multiple electric vehicles needing faster turnaround. In short: • Single-phase = up to 7.3kW charging, standard for most homes • Three-phase = up to 22kW charging, suited for high-demand setups, commercial car parks, multi-dwelling residences.

Choosing the right EV charging solution for your hotel, business, or facility means finding a system that serves your guests, staff, and visitors reliably while fitting your operational needs and budget. Simpson Partners' Commercial Series delivers elegant, commercial-grade AC charging designed specifically for hospitality venues, workplaces, apartment blocks, and visitor car parks. We work with you and qualified electrical engineers to tailor a charging solution that meets your requirements on time and on budget. Key Features to Consider: Charging Speed – 7–22 kW AC charging suits guests and staff who park for extended periods, ensuring vehicles are ready when needed. Flexible & Scalable – We offer dual socket pedestals, single socket wall mount models, and plinth-only models to suit your site layout and budget. Start with what you need today and expand easily as EV adoption grows among your guests and team. Our plinth-only option is a clever way to future-proof your charging: install the plinth infrastructure now alongside your active chargers, then add sockets later when budget allows. This cost-effective approach gets the groundworks done once, saving you money and disruption down the line. Easy Management – Our commercial chargers are OCPP-compliant, allowing seamless control through third-party specialist energy apps such as Fuuse, Tap, and Wevo. This means seamless integration if your site already has solar PV, battery storage, and daytime charging. Tap, for example, is a free app for landlords and businesses that cleverly bills users when they charge their car, with payments going straight into your bank account. Built to Last – Robust, weather-resistant designs withstand heavy use in outdoor and high-traffic environments. Future-Proof Compatibility – Universal connectors and open standards ensure your investment works with all vehicle types and avoids vendor lock-in.

Yes. Simpson & Partners EV chargers support hardwired Ethernet connections, providing a more stable and reliable alternative to Wi-Fi—particularly in areas with poor signal strength or network interference.

Look for a reliable, durable charger with minimal downtime that complements your property's aesthetic. It should include MID meters for accurate billing and OFGEM compliance with UK government requirements. Simpson & Partners Holiday Series offers both wall-mounted and freestanding models, built from metal (not plastic) with 132 colour combinations to enhance your property. Simon from Coillemore House chose carefully: "I chose the Home 7 Plus so I could get the right colour combination. Neptune blue with a mid oak lid to fit in with the stone walls of our Georgian property. We love how it looks, it's super durable so it can stand up to all the weather Scotland can throw at it, and it's discreet so it doesn't look out of place."

Yes. EV drivers actively filter their search for properties with on-site charging, and this segment is growing rapidly. Without a charger, you're invisible to these guests. Properties with charging see increased bookings year-round, improved competitiveness, and future-proof appeal as EV ownership continues to rise. Emma from Beaumont House Hotel in Cheltenham explains: "It makes the hotel appear higher up in the ranking on online travel agents such as Booking.com and Expedia as guests can tick hotels with EV chargers, we pop up immediately. I estimate 10% of business is repeat business by guests owning electric cars throughout the year." Simon from Coillemore House in the Scottish Highlands adds: "We were keen to offer EV charging as a value add and as a differentiator to other homes in the area. We were surprised to have multiple guests from the south east and London driving up in electric vehicles. There's more demand than we initially believed."

No. Our paint finishes are designed to withstand UK weather, rain, UV sun and frost. Metal and wood lids on all models are treated for durability, so your charger will stay looking great for years. We make our wood lids our of sustainable Accoya. Dimensionally stable, Accoya wood is a modified pine that undergoes an acetylation process. The result is real wood that doesn’t rot. It doesn’t warp, swell or shrink becuase the small water molecules inside the wood are effectively replaced by acetic acid. ie it's 'pickled'. Wooden lids will in say 10 years begin to change colour if they are exposed to UV light. The change will be very slight becuase we use specialist transluscent paint coats that protect from UV light. The metal fronts are power coated. Their colour will stay the same for many years.

If you want 2 or more sockets, that's absolutely fine. Our Home Series wall mount options and the Freestanding home unit each come with 1 socket, so you'd need two separate units if you want two charging points. Our Business Series Freestanding Dual is designed with 2 sockets mounted back to back on one post. If you choose the dual 22kW option with a three-phase power supply, you can send up to 22kW to each socket. If you opt for the 7kW version on a single phase, you'll get 7kW per socket. Just keep in mind: if you install 2 separate 7kW chargers and you have a single phase power supply, the 7.3kW available will be shared between the two chargers when they're both in use.

The Home 7 and Home 7 Plus are both single-phase AC chargers and will deliver up to 7.3kW (32 amps) to your car. The Home 22 is a three-phase charger and can deliver up to 22kW—three times the power. Just keep in mind, you’ll need a three-phase power supply to get the full 22kW.

Your charger arrives pre-assembled with the top and front colours you selected. Inside you’ll also find: *Your wired Energy Manager, usually located in the “Important Bits” box inside. *Quick Start Guide, including QR codes to download the Simpson & Partners app. *Serial Number & PIN card keep this safe, as it provides secure access to your charger and is required for setup, support and remote diagnostics.* Mounting template and standard fixings (if applicable). Note: If you ordered cable hooks, these are shipped in a separate box.

The speed you can charge your car at home depends on three things: your home’s electricity supply, the charger you install (7kW or 22kW) and your car’s onboard charging capability. Most UK homes have a single-phase supply, which supports up to 7kW charging. If you have a three-phase supply, you can install a 22kW charger for much faster charging. The third but crucial element is your car’s onboard battery. Sometimes referred to as an OBC, the onboard battery is fixed and inside your car. Some hybrid plug in cars have 3.7kW on board battery, the majority of cars have 7kW, some have 11kW and a few have 22kW. The fastest you can charge your car at home is always going to be limited by the smallest number: Let’s see this in action: Example 1: If your home power supply is single phase and you choose a 7kW charger and plug in a Tesla with an onboard battery of 22kw, then the fastest you can charge will be 7kW. This is because the maximum available of power at your home is 7kW. If you have a 22kW charger, then the maximum rate you can charge is still 7kW. Example 2: You have three phase power supply and a 22kW eV charger, your car is a lovely brand-new car that has an on-board charger of 3.7kW. The fastest you’d be able to charge is 3.7kW.

Not necessarily. Octopus may charge your car at any time to optimise cost and carbon efficiency. Your bill will still reflect the lower smart charging rate.

Three-phase power is term used for describing the amount of power going into a building from the national grid. It is more commonly found in commercial buildings or larger homes. It uses three live wires, allowing electricity to be delivered more efficiently and at a higher capacity than the more common single-phase power. If your property has a three-phase supply, this means that it supports up to 22kW charging. So if you install a 22kW charger, you’ll be able to send up to 22kW to your vehicle. Which can be useful for vehicles with larger on-board battery or busy households with 2 or more EVs. If your home has single phase power, then you'll be able to happily charge up to 7kw.

Our EV chargers are designed to be installer-friendly, making the installation process straightforward for qualified electricians. Professional Installation Required: We recommend using a qualified electrician to install your charger. This isn't a DIY product – professional installation ensures your charger meets all safety standards and building regulations. Why installers love our chargers: Our products are built with installers in mind, featuring intuitive design and clear instructions that make the job quick and hassle-free. Easy setup for you: Once installed, connecting your charger to WiFi is simple. Just use Bluetooth on your mobile phone, stand near your charger, and follow the app prompts to connect to your WiFi network. You'll be up and running in minutes with full access to smart features like remote monitoring and charging schedules.

We’re continuing to invest in support throughout 2026, building on the reliability gains delivered with our V3 hardware. This platform is also being extended to our 22 kW chargers, bringing the same stability across the full range.On the software side, we’re releasing updates that prevent issues before they appear, along with a full app redesign featuring guided, step‑by‑step diagnostics so you can resolve most problems instantly. And if you do need us, we’re expanding our phone, email and live chat availability for faster access to the team.Our approach is simple: the best support works quietly in the background with continuous firmware improvements, automatic fixes and regular updates that make your charger more reliable over time and more real people to answer your calls.

You set your own kWh rate and have two payment options. Use Tap Electric (free for hosts) where guests scan a QR code and pay automatically, with revenue going straight to your bank account. Or check the Simpson & Partners app to see energy usage and collect payment before guests leave. Either way, it's hassle-free. Beaumont House uses Tap Electric: "Tap Electric's app is so much simpler for guests to use. We haven't had one request for help with the app since installing Simpson & Partners chargers."

Simpson & Partners was born out of a genuine desire to combine timeless design and best practice engineering. Our team are focussed on providing high-quality EV chargers that look great, work great, connect with Octopus Energy tariffs and won't end up in the landfill. We are a small company and it's taken time and experience to engineer quality and design build into a modern day appliance.Unlike others, we design performance chargers for both home and commercial environments and are the only business that provides an integrated freestanding pedestal design that (in our opinion!) looks nice. We support our customers and installers with a trusted UK support team based at our Cotswold HQ. UK engineering best practises ensures that our chargers stand out for both reliability and future proof technology. ‍Our home wall mount and freestanding chargers have sold to the UK, Europe, Iceland, Switzerland, Australia and the Philippines. Our commercial chargers can be seen at car dealerships, boutique hotels, air b n b's, holiday homes rentals, high profile leisure complexes and high-security private car parks.

You have two options. Use Tap Electric (free for hosts) where guests scan a QR code on the charger, pay automatically, and the money goes straight to your bank account. Or check the Simpson & Partners app to see exactly how much energy was used and collect payment before guests leave. Either way, you set your own kWh rate and guests understand they need to pay, just like they would at any public charging point.

The Home Basic charger is our dependable, no‑fuss choice. It features a durable grey plastic cap, four front‑panel colour options, and includes a Wired Energy Manager as standard. The Home Plus charger offers more ways to personalise your setup, with a wider range of colours and the option of premium wood or metal lids. It’s also solar‑compatible and you can choose a Wireless Energy Manager if you prefer it over the wired version. In short, the Plus is ideal if you’re looking for extra style, smarter energy management, or solar integration. The Basic is perfect when you simply want a reliable, straightforward charger that gets the job done.

Absolutely. Simpson & Partners chargers are engineered to support all EV models and PHEV. Tethered (Built-in Cable): Comes with a fixed Type 2 cable. Untethered (Socket): Features a universal socket, allowing you to use your own Type 1 or Type 2 charging cable, supporting older Type 1 vehicles as well as newer Type 2 cars.

Tethered mode is a feature you can activate from your mobile app that locks the charging cable into your Simpson & Partners charger. This is handy for preventing cable theft when you're not using the charger, or simply for added convenience – keeping your cable securely stored and ready to use.

Yes. Our Business Series modular system is built for complex installations — from tight urban developments to large private car parks. Unlike all-in-one bundles where you pay for features you don't need, our system lets you configure exactly what you require: MID meters, daisy chaining, plinth-only installations, and OCPP compatibility for buildings with solar and battery storage.

We offer a 10-year enclosure and 5-year electronics warranty, supported by our UK team. Many competitors provide shorter warranties or rely on overseas support.

Our V3 hardware now comes with an industry-leading 5-year hardware warranty. But support doesn’t stop there; whether you’re an existing customer or someone with a charger from the previous company, we’re committed to supporting you long into the future. For chargers that are out of warranty, we aim to provide ongoing help along with replacement hardware at cost where needed. We’re also launching a full catalogue of replacement parts, allowing you (or your installer) to repair your charger easily. This will include everything from front panels and lids to PCBs, sockets and even the small fixings. We’re also introducing a V3 Upgrade Programme, giving you the option to update your charger’s internal hardware to the V3 platform and benefit from the latest features and reliability improvements. So even if your warranty is coming to an end, there’s no need to worry we’ll continue to support you and ensure your charger stays reliable for the long term.